Noua generatie CORiTEC de sisteme si tehnologie CAD/CAM

    CORiTEC 350i Loader dental milling machine - Revolutia în productia de serie automata.

    MASINA DE FREZAT IN 5 AXE CORiTEC 350i cu Loader magazie automata de schimbare discuri- frezare uscata si racire + frezare materiale dure: Cr-Co si Titan

  • 5 axe prelucrare simultana
  • procesare integrata umeda si uscata
  • prelucrare metal si toate materialele importante folosite in industria dentara
  • PC and touch screen integrat
  • schimbator automat cu 20 freze
  • sistem de schimbare discuri pana la 12 Blank-uri
  • CORiTEC 350i Loader cu Magazie este printre cele mai recente modele dezvoltate de imes-icore si ofera 5 axe de procesare pentru toate materialele importante folosite in industria dentara si toate acestea intr-o versiune compacta!
  • Acest tip de masina convinge prin constrctia rigida si prin versiunea industriala a constructiei in otel/aluminiu.
  • Datorita schimbatorului automat de freze cu 20 pozitii este posibila plasarea tuturor frezelor necesare frezarii diverselor materiale in schimbatorul de freze. De semenea este posibila plasarea frezelor de rezerva in schimbatorul de freze. Schimbatorul de freze poate fi echipat individual si foarte usor dupa solicitarile imediat necesare.
  • Sistemul de prindere al blank-urilor este proiectat pentru fixarea discurior standard de 98 mm sau de 98,5 mm. Cu aceeste variante de discuri este posibila frezarea de pana la 35 unitati dintr-un disc.
  • CORiTEC 350i Loader - cu Magazie are o magazie de discuri cu schimbator automat. Exista posibilitatea echiparii magaziei cu pana la 12 discuri cu schimbare automata in timpul procesului de frezare. Datorita preciziei sitemului zero- point- clamping discurile sunt fixate sigur in timpul procesului de frezare. De aseamenea este garantata lipsa intreruperilor in timpul procesului de schimbare a discurilor. Deasemenea discurile terminate pot fi usor indepartate din magazie in timpul procesului de frezare. Astfel , acest tip de tehnologie va ofera o valoare ridicata de automatizare.
  • Cu sistemul zero-point-clamping exista posibilitatea eliberarii discului din interiorul blankholder-ului doar apasand un buton iar apoi acesta poate fi eliminat din aparat. Astfel schimbarea discurilor este posibila in afara masinii, de exemplu in cazul in care aparatul proceseaza urmatorul disc. Mai mult decat atat, sistemul zero- point- clamping permite folosirea usara si rapida a diferitelor sisteme de adaptare cum ar fi Abutmenturile prefrezate sau blocurile CAD/CAM (glass-ceramics, Lithium-Disilikate, etc.)
  • Masina proceseaza toate materialele relevante sau aplicatiile dentare. Alaturi de materialele standard cum ar fi zirconium, PMMA, ceara sau compozit, exista posibilitatea frezarii metalului de exemplu CoCr or titan. Lichidul de racire integrat permite de asemenea procesarea umeda. In special pentru materiale cum sunt titanul, glass-ceramica sau ceramica hybrida prelucarea umeda este indispensabila. De asemenea noile materiale plastice superperformante necesita procesarea cu racire cu apa.Cu acest echipament - CORiTEC 350i veti primi un sistem intuitiv All-In-One intr-un design compact. Daca este echipat cu un sitem automat de discuri (Loader), o inalta productivitate si flexibiltate sunt de asemenea asigurate. CORiTEC 350i acopera astfel toate cererile laboratoarelor dentare si nu lasa loc absolut nici unei dorinte neindeplinite!
  • Date tehnice:

  • 5 axe simultane de procesare
  • unghi axa de procesare pana la 30°
  • touch screen integrat
  • integrat control PC
  • EC drivere servo motoare in toate axele
  • bazin integrat pentru lichid racire si pompa
  • magazie schimbare freze cu 20 pozitii
  • protectie de praf pentru magazie freze
  • procesare de la inceput pana la sfarsit a pieselor (axa B in pozitia 90° position) optional zero point clamping system pentru CORiTEC 350i
  • magazie schimbare discuri cu posibilitatea optionala pana la 12 discuri pentru versiunea "CORiTEC 350i Loader"
  • CORiTEC 350i are senzor de temperatura - ofera posibilitatea de a compensa diferentele datede modificarea temperaturii in interiorul masinii.
  • Date tehnice/Descriere

    mecanica / electronica:
  • Numarul de axe si tipul de frezare - 5 axe, procesare simultana
  • unghiul de înclinare pentru prelucrare blank - axa A +/- 30º / axa B +/- 25º
  • unghiul de rotatie - axa A 360° / axa B 130°
  • tipul de motor (spindle) - motor de inalta frecventa
  • viteza maxima a motorului - 60.000 U/min, P max 1 kW
  • drivere axe - 3 axe liniare, 2 axe de rotatie drivere cu EC servo drivere
  • prindere freza - 6 mm shank
  • schimbator freze - schimbator 20 freze cu cip integrat de protectie lungime freza
  • comutator de masurare - 0,002 mm precizie
  • schimbator de discuri - CORiTEC 350i Loader: schimbator de discuri posibilitate optionala pana la 12 pozitii (versiunea standard este echipata cu 6 pozitii, pentru fiecare disc suplimentar sa va achita separat pretul)
  • PC sub Windows
  • monitor 12" integrat touch screen
  • iluminat - iluminare LED in 3 culori
  • software Remote DENTAL 2.0
  • conectari necesare:
  • greutate - CORiTEC 350i Loader: 225 kg greutate
  • latime x adancime x inaltime - CORiTEC 350i Loader: 1058 x 790 x 857 mm
  • voltaj / frecventa / capacitate maxima - 100 V - 240 V / 50-60 Hz / 2200 Watt
  • aspiratie iVAC eco+, iVAC pro+ sau iVAC 2
  • rezervor lichid racire 4,8 l integrat
  • presiune 6,5-9 bar constant
  • cantitate 80 l/min
  • masa pentru aparat - optional, nu este inclusa in pretul aparatului
  • latime - CORiTEC 350i Loader: 1100 mm latime
  • adancime - 800 mm
  • inaltime / inaltime masa recomandata 800 mm / 900 mm
  • încarcare recomandata - approx. 300 kg
  • materiale:
  • categorie materiale - zirconium oxide, aluminium oxide, PMMA, rasini, compozit, ceara, glass ceramics, hybrid ceramics, cobalt chrome, titanium
  • forma blank 98/98,5 mm cu margine
  • inaltime blank pana la 30 mm (blank-uri mai inalte la cerere)
  • procesare blocuri de CAD/CAM - da
  • CORiTEC 350i Loader dental milling machine

    Revolution in automatic series production.
    With the CORiTEC 350i and CORiTEC 350i Loader processing systems, a novel machine concept has been developed which now meets all modern requirements for CAD/CAM processing. The processing of all relevant blank materials from CoCr, titanium, zirconium dioxide, plastics, block materials, and new future materials is thus possible with a single machine system, virtually without restrictions. The modern and optimized machine kinematics, with high free angles of the 5 axes of over 30°, allows milling and grinding in wet and dry processing in high quality, for almost any application. This makes the system ideal for demanding labs as an all-rounder to produce all typical applications in your own lab, in high quality, using CAD/CAM technology.
    In the CORiTEC 350i Loader system, the integrated technology of automated 12-fold material changers is trend-setting; it allows the machine to perform its work at full capacity and round the clock without supervision, in order to, for instance, mill high-volume, time-consuming applications, such as models, splints, or dentures.

    Technical highlights:

  • 5-axis simultaneous processing
  • Integrated wet and dry processing
  • Processing of all important materials used in the dental industry, including metalworking
  • Automatic blank changer with up to 12 blanks, including zero point clamping system
  • 20-fold tool changer
  • Servomotors on all axes
  • Axis tilt angle up to 30°
  • HF spindle up to 60,000 rpm
  • Integrated control PC with touch screen
  • Chip protection of the tool changer
  • Frontal machining of the workpiece possible (B-axis in 90 degree position)
  • Technical specifications CORiTEC 350i Loader - dental milling machine

  • Number of axles and machining type: 5 axes, simultaneous machining
  • Max. tilt angle of the rotary axis: A-axis +/- 30° / B-axis +/- 25°
  • Wet processing: Integrated
  • Spindle max. / Pmax~: 60,000 rpm / 1 kW
  • Axle drives: Servomotors
  • Tool fitting: 6 mm shaft
  • Tool changer: 20-fold with chip protection cover
  • Workpiece changer: 12-fold fully automatic (standard 6-fold, extendable to 12-fold)
  • Weight: 225 kg
  • width x depth x height: 1058x790x857 mm
  • Mains voltage / frequency / power: 100V-240 V / 50/60 Hz / 2300 W
  • Compressed air supply: 6-9 bar constant supply, 60 litres/minute
  • Materials: CoCr/NEM, titanium, zirconium dioxide, aluminium oxide, PMMA, plastics, composites, wax, glass ceramics, hybrid ceramics
  • Compatibility: 98 mm/98.5 mm blanks, CAD/CAM blocks, NT-Trading pre-milled abutments, Medentika PreFace®abutments, Lava frames
  • Additional information

  • Number of axes: 5
  • Number of tool positions: 20
  • Pmax~ maximum spindle speed: 1 kW 60.000 rpm
  • Drive motors: Servomotors
  • Blank change / Number of blank holder: Automatic up to 12-times
  • Dry processing: Ideally suitable
  • Wet processing: Ideally suitable
  • Blank processing 98 / 98,5mm: Ideally suitable
  • Block processing: (CAD / CAM blocks) ideally suitable
  • Materials:

  • Zirconium oxide / aluminium oxide: Ideally suitable
  • PMMA / resins / PEEK /composite / wax: Ideally suitable
  • Glass ceramics / hybrid ceramics: Ideally suitable
  • Sintered metal: Ideally suitable
  • Chromium cobalt: Suitable
  • Titanium: Suitable
  • Applications

  • Copings / Crowns / Inlay / Onlay: Ideally suitable
  • Bridges up to 3 items: Ideally suitable
  • bridges up to 14 items: ideally suitable
  • Telescopes: Ideally suitable
  • Therapeutic splints (bite splints): Ideally suitable
  • Tooth models: Ideally suitable
  • Model cast: Ideally suitable
  • Abutments on titanium adhesive basis: Ideally suitable
  • Prefabricated abutments of Ti /CoCr: Ideally suitable
  • One-piece abutments (Zr, resins): Ideally suitable
  • one-piece abutments (CoCr, titanium): Suitable
  • Barr structures / one-piece abutment bridges on implants: Suitable

    CORiTEC 350i and 350i Loader dental CAD/CAM Machines



    CORiTEC 350i / 350i Loader - glass ceramics grinding



    CORiTEC 350i / 350i Loader - metal milling



    CORiTEC 350i / 350i Loader - plastics milling



    CORiTEC 350i / 350i Loader - pre-frabricated abutments milling



    CORiTEC 350i / 350i Loader - zirconia milling



    CORiTEC 350i dentalmilling machine presentation (italian)



    Masini de frezat CAD/CAM producator imes-icore Germania




Scannere 3D

Dental milling machines from imes-icore